Problem 32.2 A tube with a rectangular cross section is to be fabricated by stereolithography. Outside dimensions of the rectangle are 38 mm by 60 mm, and the corresponding inside dimensions are 30 …

Engineering Mechanical Engineering Mechanical Engineering questions and answers Problem 4. (Build Cycle Time in Stereolithography) The square cup-shaped part shown is fabricated using …

A cone-shaped part is to be fabricated using stereolithography. The radius of the cone at its base = 35 mm, and its height = 50 mm. To minimize the staircase effect, layer thickness = 0.05 mm. The …

A prototype of a part is to be fabricated using stereolithography. The base of the part is shaped like a right triangle with dimensions 36 mm by 48 mm. In application, the part will stand on this base. The …

 The extruder workhead moves in the x-y plane at a speed of 150 mm/s.  A delay of 10 s is experienced between each layer to reposition the The part in Problem 3 is to be fabricated using …

A part prototype is to be fabricated using stereolithography. The base of the part is shaped like a right triangle with dimensions 36 mm by 48 mm. In application, the part will stand on this base. The height …

(Cost per Piece in Additive Manufacturing) The cost of the stereolithography machine is \\ ( \\$ 60,000 \\) installed. It operates 5 days per week, 8 hours per day, 50 weeks per year, and is expected to last 5 …

FDM (fused deposition modeling), SLA (stereolithography), and SLS (selective laser sintering) belong to different categories of additive manufacturing but can all be used to produce plastics.

Question: T5. Q4The square cup-shaped part shown in Figure 32.11 is fabricated using stereolithography. The base of the cup is 40mm on each side and 5mm thick. The walls are …

Here’s how to approach this question To identify which option is not a 3D printing process, familiarize yourself with the types of 3D printing technologies such as stereolithography (SLA), selective laser …